SC5-FESTIVAL

CompactPCI© Serial CPU Card • Intel® XEON® E3 v6 Mobile Workstation Processor or 7th Generation Intel® Core™ Processor

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

The SC5-FESTIVAL is a rich featured high performance 4HP/3U CompactPCI® Serial CPU board, equipped with an Intel® Xeon® E3 familiy mobile workstation processor for demanding applications. For scalability, the SC5-FESTIVAL is also available with a 7th Generation Intel® Core™ processor.
The SC5-FESTIVAL front panel is provided with two Gigabit Ethernet jacks, two USB 3.0 receptacles, and two DisplayPort connectors. In addition, up to two USB Type-C front panel receptacles are available as an option, one of them usable alternatively as (third) DisplayPort.

On-board mass-storage solutions are based on low profile mezzanine expansion cards, which accommodate M.2 2280 size SSD modules. Up to two sockets are available for fast NVMe® style PCIe® x4 modules (S48-SSD).

The SC5-FESTIVAL is equipped with up to 32GB DDR4 RAM with ECC support. Up to 16GB memory-down are provided for rugged applications, and another 16GB are available via the DDR4 ECC SO-DIMM socket.
The powerful Xeon® E3-1500 v6 series processor is accompanied by the CM238 mobile PCH, for a maximum of high speed I/O resources (e.g. PCI Express®, SATA, USB). Thus, 22 PCIe lanes are available for backplane use, and up to 8 lanes for local mezzanine expansion.

The SC5-FESTIVAL is provided with an on-board SATA hardware RAID controller, enabling high-capacity mass storage solutions across the CompactPCI® Serial backplane.

As an option, up to eight Gigabit Ethernet Ports are available via the backplane connector P6 (low profile mezzanine expansion card).

Downloads & Ressources

Documents

Application Notes

Power Event (Power Down)

General Information

CompactPCI® Serial

Firmware

Firmware Update

Drivers

Intel® Driver & Support Assistant

Board Support Packages

QNX

Expansion Modules

Low Profile Mezzanine Modules

C48

S20

S40

S42

S48

S80

S82

S83

Side Cards

SCJ

SCL

SCZ

PCU

Backplane Coupler

SCX

ECX

Specifications

General

CompactPCI® Serial (PICMG® CPCI-S.0) CPU card
Form factor single size Eurocard (board dimensions 100x160mm²)
Mounting height 3U
Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
Backplane communication via PCI Express® Gen3, SATA 6G, USB 3.0, Gigabit Ethernet
Local mezzanine expansion option, COTS and custom specific boards

Processor

Intel® Kaby Lake-H mobile platform with ECC (CM238 mobile workstation PCH)
Intel® Xeon® processor E3 v6 family (mobile workstation)
- Xeon E3 1505M v6 • 3/4GHz • 8M • 4C/8T • DDR4 2400 ECC • 45/35W • GT2 – P630 • vPRO™
- Xeon E3 1505L v6 • 2.2/3GHz • 8M • 4C/8T • DDR4 2400 ECC • 25W • GT2 – P630 • vPRO™
- Xeon E3 1501M v6 • 2.9/3.6GHz • 6M • 4C/8T • DDR4 2400 ECC • 45/35W • GT2 – P630 • vPRO™
- Xeon E3 1501L v6 • 2.1/2.9GHz • 6M • 4C/8T • DDR4 2400 ECC • 25W • GT2 – P630 • vPRO™
7th Generation Intel® Core™ mobile processor
- i3 7100E • 2.9GHz • 3M • 2C/4T • DDR4 2400 ECC • 35W • GT2 – 630
- i3 7102E • 2.1GHz • 3M • 2C/4T • DDR4 2400 ECC • 25W • GT2 – 630

Firmware

Phoenix® UEFI (Unified Extensible Firmware Interface) with CSM*
Fully customizable by EKF
Secure Boot and Measured Boot supported – meeting all demands as specified by Microsoft®
Windows®, Linux and other (RT)OS’ supported
Intel® AMT supported for Intel® Xeon® E3 v6 (disabled by default, must be enabled via BIOS setup)

* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS’

Main Memory

Graphics

Integrated HD Graphics Engine, 3 symmetric independent displays
3D HW acceleration DirectX12, OpenCL 2.x, OpenGL 4.3/4.4, ES 2.0
HW video decode/encode HEVC10b 10-bit, VP9 10-bit, JPEG
HDR (High Dynamic Range) Rec. 2020 Wide Color Gamut
Content protection
UHD premium content playback
Front panel options: Dual DisplayPort (DP) connectors
3rd DisplayPort optional via Type-C connector on low profile mezzanine card
Max resolution 4096 x 2304 @60Hz (any DisplayPort, concurrent operation)
DisplayPort™ 1.2 Multi-Stream Transport (MST) – display daisy chaining
MST max resolution via single DP connector 2880×1800@60Hz (2 displays), 2304×1440@60Hz (3 displays)
Integrated audio (3 independent audio streams)

Networking

Up to 10 networking interfaces in total – 2 x front RJ45 GbE, option 8 x backplane or 4 x M12-X front
1000BASE-T, 100BASE-TX, 10BASE-T connections
Front port 1 – I219LM with Intel® AMT support
Front port 2 – Intel® I210-IT -40°C to +85°C operating temperature GbE NIC w. integrated PHY
IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
Backplane Gigabit Ethernet option w. S80-P6 mezzanine module – Marvell Peridot switch
Backplane Gigabit Ethernet option w. S82-P6 mezzanine module – 4 x Intel® I210-IT NIC
Option quad front panel RJ45 2.5GbE ports with SCJ-VEENA side card (8HP front panel width)
Option quad front panel M12 X-coded GbE ports with SCL-RHYTHM side card (8HP front panel width)

Chipset

On-Board Building Blocks

Security

Front Panel I/O (4HP)

2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM – Intel® AMT, 2 = I210IT)
2 x DisplayPort (from processor integrated HD graphics engine, standard latching DP receptacles
2 x USB 3.0
Option 2 x Type-C USB 3.1 Gen1 (requires low profile mezzanine expansion card w. front panel I/O)
Support for Type-C locking plugs (dual screw) according to the ‘Locking Connector Spec. Rev. 1.0’
Option DisplayPort Alt Mode on lower Type-C connector (3rd video monitor output)

CompactPCI® Serial Backplane Resources

PICMG® CPCI-S.0 CPU card & system slot controller
16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Intel® Xeon® or Core™ CPU
6 x PCIe Gen3 8GT/s (6 links x 1 for peripheral slots)
2 x SATA 6G (from CM238 PCH)
4 x SATA 6G (Marvell hardware RAID controller)
5 x USB2, 3 x USB3 (from CM238 PCH)
Backplane Gigabit Ethernet option w. S80-P6 mezzanine module – Marvell Peridot switch
Backplane Gigabit Ethernet option w. S82-P6 mezzanine module – 4 x Intel® I210-IT NIC
Backplane 2.5GbE option w. S83-P6 mezzanine module – 4 x Intel® I226-IT NIC

Local Expansion and Mass Storage Solutions

Mezzanine side card connectors for local expansion
Low profile mezzanine modules available (4HP front panel) and also side cards (8HP F/P assembly)
P-EXP – Legacy (from PCH)
P-HSE1 – configurable as 4 x SATA 6G or 4 x PCIe (from CM238 PCH), 1 x USB3
P-HSE2 – 4 x PCIe (from CM238 PCH) & 3rd DisplayPort (from CPU)

4HP Low profile mezzanine module preferred options:
S20-NVME Mezzanine module – 1 x M.2 2280 NVMe SSD socket, 1 x Type-C USB F/P connector
S40-NVME Mezzanine module – 1 x M.2 2280 NVMe SSD socket, 1 x M.2 2280 SATA SSD socket, 2 x Type-C USB F/P Connector (1 connector enabled for DisplayPort alternate mode)
S42-MC Mezzanine module – 1 x M.2 2280 NVME SSD socket, 2 x Minicard sockets
S48-SSD Mezzanine Module – 2 x M.2 2280 NVME SSD sockets, 1 x USB Type-C
S80-P6 Mezzanine module – 1 x M.2 2280 NVMe SSD socket, 8 x Gigabit Ethernet via P6 backplane connector (TSN/AVB switch based solution)
S82-P6 Mezzanine module – M.2 NVMe SSD & 4 x GbE NIC via P6 backplane connector
S83-P6 Mezzanine module – M.2 NVMe SSD & 4 x 2.5GbE NIC via P6 backplane connector
Custom specific storage & I/O mezzanine module design

8HP/12HP Mezzanine side card options
SCJ-VEENA Quad RJ45 2.5GbE NIC & M.2 SSD storage
SCL-RHYTHM Quad M12-X GbE NIC & M.2 SSD storage
SCZ-NVM Dual M.2 NVMe SSD, quad UART
P01-M12 Replacement for RJ45 GbE jacks by M12-X receptacles
PCU-P400-UPTEMPO Dual M.2 SATA SSD, HD-Audio, 2 x RS-232, USB2
Custom specific side card design – I/O and storage

Special purpose mezzanine side card option:
SCX-PCIE CompactPCI® Serial backplane doubling
ECX-PCIE Backplane coupler CompactPCI® Serial to CompactPCI® Express

Environmental & Regulatory

Suitable e.g. for industrial, transportation & instrumentation applications
Designed & manufactured in Germany
ISO 9001 certified quality management
Long term availability
Rugged solution
Coating, sealing, underfilling on request
Lifetime application support
RoHS compliant
Operating temperature 0°C to +70°C
Operating temperature -40°C to +85°C (industrial temperature range) on request
Storage temperature -40°C to +85°C, max. gradient 5°C/min
Humidity 5% … 95% RH non condensing
Altitude -300m … +3000m
Shock 15g 0.33ms, 6g 6ms
Vibration 1g 5-2000Hz
MTBF 21.2 years
EC Regulatory EN55035, EN55032, EN62368-1

RT OS Board Support Packages & Driver

Simplified Block Diagram

Contact Us

+49 (0)2381/6890-0

SC5-FESTIVAL

CompactPCI© Serial CPU Card • Intel® XEON® E3 v6 Mobile Workstation Processor or 7th Generation Intel® Core™ Processor

EKF Elektronik GmbH

Products

Industries

EKF

EKF

Social Media